Specification
| Weight | N/A |
|---|---|
| Dimensions | N/A |
Select a vehicle to find exact fit parts
Gold Series – High Performance Coil Springs – Front and Rear
For over 25 years, Landrum’s Gold Series High Performance Coil Springs have been the trusted choice of racers seeking unmatched durability, consistency and performance. Whether you race on dirt or pavement, our racing coil springs deliver the precision and reliable consistency you need to dominate the track.
Why Choose Landrum Gold Series High Performance Coil Springs?
- Proven Track Record: Trusted by racers for over 25 years, Landrum’s Gold Series Springs are the preferred choice for Saturday night racers.
- State-of-the-Art Engineering: Our high performance coil springs are designed using cutting-edge spring design software to engineer the coil springs that racers are asking for.
- Premium Materials: We use high-tensile chrome silicon alloy steel, made in the USA, to manufacture track car suspension springs that provide maximum strength and perform as designed, even after repeated compression and extension.
- Rigorous Quality Control: Each Gold Series Spring is individually tested for precision and consistent performance, ensuring your springs meet exact specifications.
The Best Engineering and Materials for Racing Performance
We combine the latest spring design software with state-of-the-art engineering methods to produce the best high-performance coil springs on the market. Built for the most demanding races, Landrum springs ensure your suspension is up to the challenge.
- Superior Materials: Made from high-tensile chrome silicon alloy steel, our high performance coil springs provide unmatched strength, durability and lightness, so you can race with confidence.
- Precise Engineering: Designed with cutting-edge technology to ensure the highest performance for dirt and pavement racing.
- Testing for Perfection: We test each racing coil spring for tensile and compressive stiffness before manufacturing, ensuring every spring meets our rigorous quality standards.
Proven Performance – See the Landrum Difference
We test each Landrum Gold Series Spring to ensure it is within 2% of specification. We back it up by providing a dyno sheet showing how the spring performs as it is compressed. Providing you with confidence in every race. No other manufacturer of coil springs for racing does this.
Gold Series High Performance Springs – Available Sizes
Our Gold Series High Performance Coil Springs are available in a range of ODs, lengths, and rates to fit the needs of your racing setup. Whether you’re looking for front coil springs or rear coil springs, Landrum has the right solution for you.
Gold Series Front Coil Springs:
- 5” OD Front Springs (8” Length): Rates from 400 lb./in to 1000 lb./in
- 5” OD Front Springs (9.5” Length): Rates from 400 lb./in to 1600 lb./in
- 5” OD Front Springs (8.5” Length): Rates from 400 lb./in to 1500 lb./in
- 5” OD Front Springs (8” Length): Rates from 400 lb./in to 1500 lb./in
Gold Series Rear Coil Springs:
- 5” OD Rear Springs (8” Length): Rates from 125 lb./in to 450 lb./in
- 5” OD Rear Springs (10.5” Length): Rates from 100 lb./in to 475 lb./in
- 5” OD Rear Springs (13” Length): Rates from 100 lb./in to 475 lb./in
- 5” OD Rear Springs (14” Length): Rates from 100 lb./in to 400 lb./in
- 5” OD Rear Springs (15” Length): Rates from 75 lb./in to 275 lb./in
- 5” OD Rear Springs (16” Length): Rates from 75 lb./in to 375 lb./in
- 5” OD Rear Springs (18” Length): Rates from 75 lb./in to 125 lb./in
- 5” OD Rear Springs (20” Length): Rates from 50 lb./in to 100 lb./in
Landrum Service – Your Partner in Racing Excellence
At Landrum, we don’t just sell high performance coil springs; we work with racers and chassis builders to design and produce the perfect suspension solution for their needs. We take pride in providing personalized support and ensuring every customer gets the exact high-performance spring they need to win.
Ready to Upgrade Your Suspension?
Get Your Landrum High Performance Coil Springs Today! We’re ready to help you take your racing to the next level with springs that provide outstanding strength, precision, and reliable consistency.
Use our parts finder or contact us to find the perfect high-performance coil springs for your race car.
See more Landrum competition suspension springs technical information here.
Want to know how stacking springs affects spring rate? Check out the video:
Related products
-
Landrum Performance Stock Appearing Double Pig Tail Rear Springs are made to resemble black painted stock double pig tail springs. Offered in 7″ OD x 14″ with a broad range of rates that make it easy to find the spring you need for the best handling, traction, and overall performance.
Stock Appearing Double Pig Tail Rear Springs are developed for circle track and drag racing classes that require stock appearing springs and don’t require use of spacers or weight jacks.
Landrum Performance Springs are for racers who demand the best spring performance, accuracy, durability, and consistency.
Made with Landrum Quality
- Stock Appearing Double Pig Tail Rear Springs are made with the best US made High Tensile Chrome Silicon Alloy Steel Wire for strength and reliability.
- Cold wound for strength, hardness, and close tolerance.
- Properly heat-treated and stress relieved.
- Our spring rate tolerances are tested to consistently be within 2% of specification. This ensures you get the spring rate you are expecting. We prove it with a dyno sheet provided with each spring showing the performance of the spring as it is compressed.
Stock Appearing Double Pig Tail Rear Springs – Sizes
- Designed for chassis that use double pigtail springs.
- 7” OD
- 14” Length
- Available Rates: 175, 200, 225, 250, 275, and 300 lbs. per inch
- Tip: Full size GM & Ford applications have an overall spring height of 14″ with a 7″ OD.
Additional Landrum Performance Springs technical information can be found here.
-
Landrum Performance Front Drag Racing Coil Springs are designed to deliver the performance, reliability, and consistency you need to win. Landrum front drag race springs are taller than OEM springs and use softer rates to give your car the correct ride height while providing more stored energy for instant weight transfer during launch. This helps to give you increased torque control, reduced wheel hop, and faster 60ft and 1/4-mile ET’s.
Landrum drag race springs are available for the front suspension of GM vehicles and are offered in configurations to fit OEM A-Arms and Aftermarket A-Arms with no modifications required. Springs with a 5” outer diameter and 18” length are available for 1964-1972 GM vehicles, and springs with a 5.5” outer diameter and 18” length are offered for 1973 and newer models.
Front Drag Racing Coil Spring Rates
Our Front Drag Racing Coil Springs are available in a range of rates including:
- 150 lbs./in.
- 165 lbs./in.
- 180 lbs./in.
- 200 lbs./in.
- 225 lbs./in.
- 250 lbs./in.
Technical Information
All front springs are closed and ground on one end to provide proper contact with the frame. The opposite end is either open to properly fit into the lower control arm of OEM A-Arms or closed for Aftermarket A-Arms.
Landrum Performance Front Drag Racing Coil Springs are light weight, high travel and made with the highest-grade High Tinsel Chrome Silicon Steel wire.
The drag race springs are cold wound, not hot wound. Each is properly heat treated and stress relieved to ensure the sides of the spring remain parallel during installation.
All Landrum Front Drag Racing Coil Springs use standardized testing procedures to ensure the best quality and performance.
Our springs are powder coated and not plated which avoids hydrogen embrittlement, a condition that can be caused by electroplating and can weaken metal.
Each spring is manufactured with the highest tolerance in mind and is designed with the correct pitch and height ratio to insure a consistent rate throughout the entire cycle.
More technical and application information can be found here.
_______________________
Spring Compressor for Long Length Coil Springs
This Spring Compressor makes it easy to install our 18” Front Drag Racing Coil Springs. Standard spring compressors just aren’t long enough to properly compress 18” springs, but our spring compressor is. The spring compressor is inserted through the top shock absorber opening and a long length threaded rod allows the compressor fingers to reach down to the bottom of the spring. A position adjustable bearing located toward the top of the rod seats on the top of the shock opening so the threaded rod turns freely when the spring compressor is tensioned or loosened.
Retail Price: $169.00
To purchase a spring compressor:
- Add a spring compressor to your Front Drag Racing Coil Springs order.
- Or to purchase a spring compressor separately click here.
Download Spring Compressor Instructions:
Download “Spring-Compressor-Instructions-2.0.pdf” Spring-Compressor-Instructions-2.0.pdf – Downloaded 11959 times – 199.22 KB_______________________
-
Landrum Performance Stock Appearing Pig Tail Rear Springs are for circle track and drag racing classes that require stock appearing springs which use only one pig tail hookup and don’t require use of spacers or weight jacks.
The 5.5” OD Stock Appearing Springs are available in 9” and 11” lengths and are painted black for a stock appearance. A wide range of spring rates makes it easy to find the rate you need. Springs are closed and ground on both ends to fit stock mounting points.
Landrum Stock Appearing Pig Tail Rear Springs are built for those who demand the best spring performance and provide the reliability and durability you need to win.
If you need stock appearing double pig tail rear springs we have 14” free length springs available in a wide range of spring rates. You can see them here.
Premium Quality Materials and Manufacturing
- Landrum Performance Stock Appearing Rear Pig Tail Springs are produced with the highest quality US made High Tensile Chrome Silicon Alloy Steel Wire for strength and reliability.
- Landrum pig tail springs are cold wound, which creates steel that is stronger and harder than hot wound steel and allows for more exacting tolerances.
- Landrum springs have the tightest tolerances in the industry and are guaranteed to hold their tolerance to 2%. We prove it with a dyno sheet included with each spring.
Stock Appearing Pig Tail Rear Springs – Sizes
- 5.5” OD
- Available Free Lengths: 9” and 11”
- 9” Free Length Available Rates: 300 and 350 lbs. per inch
- 11” Free Length Available Rates: 150, 175, 200, 225, 250, 275, 300 and 350 lbs. per inch
Tip: Ford Mustang and GM metric chassis stock pig tail spring size is 5.5” OD with an 11” Free Length.
Additional Landrum Performance Springs technical information can be found here.