Specification
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Photo # | 1066 |
Select a vehicle to find exact fit parts
Elite Series Racing Springs – Best IMCA and UMP Coil Springs
What Makes Landrum Elite Series Coil Springs Ideal for IMCA and UMP Racing?
Landrum’s Elite Series Coil Springs are Landrum’s best performing linear rate conventional coil springs. These durable racing springs don’t take a set and maintain free height and specified rate. Each spring is tested to verify it meets a strict ±2% rate specification, and a dyno sheet is included to document its performance.
Engineered as Landrum’s ultimate linear rate conventional coil spring, Elite Series Coil Springs are built for the rigors of IMCA and UMP racing and trusted by racers seeking the best suspension setup to stay ahead of the competition. Landrum Elite springs deliver unmatched precision, durability, and performance on every lap.
How do Landrum Racing Springs Improve Performance?
- Precision Engineering and Manufacturing – Produced using cutting-edge engineering and manufacturing technology to ensure durability and the most consistent rates in the industry.
- Premium Materials – High Tensile Chrome Silicon Alloy Steel is used for springs with superior strength, reliability, and the ability to provide consistent performance without taking a set after being fully compressed repeatedly.
- Proven Performance – Every spring includes a dyno sheet showing it meets a strict ±2% rate specification. No other racing spring manufacturer does this.
- Track-Tested – Trusted by racers nationwide for durable and consistent performance.
- The Springs You Need – A wide range of sizes and rates help to fine-tune suspension setup.
- Made in the USA – Elite Series Coil Springs are manufactured at Landrum’s Mentone, Indiana facility.
Which Coil Spring Size Do You Need?
Landrum Elite Series Coil Springs come in a variety of sizes and rates to match your racing needs, whether for IMCA modifieds, UMP late models, stock cars, or other race cars.
Front Coil Springs (5″ and 5.5″ OD)
- 5″ OD x 9.5″ Length – Rates: 300 lb./in to 650 lb./in
- 5″ OD x 10.5″ Length – Rates: 300 lb./in to 450 lb./in
- 5.5″ OD x 9.5″ Length – Rates: 500 lb./in to 1100 lb./in
Rear Coil Springs (5″ OD)
- 5″ OD x 11″ Length – Rates: 125 lb./in to 350 lb./in
- 5″ OD x 12″ Length – Rates: 175 lb./in to 300 lb./in
- 5″ OD x 13″ Length – Rates: 80 lb./in to 275 lb./in
- 5″ OD x 16″ Length – Rates: 50 lb./in to 250 lb./in
- 5″ OD x 20″ Length – Rates: 50 lb./in to 75 lb./in
How Can Landrum Springs Help You Win?
Consistency and precision are the keys to victory. Landrum’s Elite Series Coil Springs give you the performance edge needed to dominate the track. Whether you are looking for springs for dirt modified cars, stock cars, dirt late models, or other types of IMCA and UMP race cars, we have the consistent performance racing springs you need to optimize your suspension set up for maximum control and traction.
Whether you need springs for dirt modifieds, stock cars, dirt late models, or other IMCA and UMP race cars, we offer consistent-performance racing springs designed to optimize your suspension for maximum control and traction.
Looking to fine-tune your suspension? Elite Series Coil Springs deliver the performance you need to gain a competitive edge—Landrum has you covered!
Learn more about the manufacture of Landrum coil springs here.
Want to know how stacking springs affects spring rate? Check out the video:
Related products
-
Landrum Street Stock/Stock Appearing Front Coil Springs are engineered for racing classes that require stock appearing front springs and don’t require use of spacers or weight jacks.
Street Stock/Stock Appearing Front Coil Springs Performance
- Listening to racers, Landrum engineers springs that deliver the performance they need.
- Our lightweight, durable, precision racing springs are made to the tightest tolerances in the industry. They’re guaranteed to hold their tolerance to 2% and we prove it with a dyno sheet included with each spring.
- Landrum Performance Springs deliver and maintain reliable and consistent performance for the high demands of stock car racing.
Precision Spring Manufacturing
- The highest grade of US made High Tensile Chrome Silicon wire is used for manufacture. This wire will maintain accurate spring rate and free length.
- Our springs are cold-wound, not hot-wound and then are properly heat-treated and stress-relieved.
Street Stock/Stock Appearing Front Coil Springs Sizes
Street Stock and Stock Appearing Front Coil Springs are available in a choice of diameters, free lengths, and spring rates to fit your application.
- 5” and 5.5” Outer Diameters
- 11” and 12” Free Lengths
- Rates of 100-1400 lbs. per inch
Additional Landrum Performance Springs technical information can be found here.
-
Landrum Performance Front Drag Racing Coil Springs are designed to deliver the performance, reliability, and consistency you need to win. Landrum front drag race springs are taller than OEM springs and use softer rates to give your car the correct ride height while providing more stored energy for instant weight transfer during launch. This helps to give you increased torque control, reduced wheel hop, and faster 60ft and 1/4-mile ET’s.
Landrum drag race springs are available for the front suspension of GM vehicles and are offered in configurations to fit OEM A-Arms and Aftermarket A-Arms with no modifications required. Springs with a 5” outer diameter and 18” length are available for 1964-1972 GM vehicles, and springs with a 5.5” outer diameter and 18” length are offered for 1973 and newer models.
Front Drag Racing Coil Spring Rates
Our Front Drag Racing Coil Springs are available in a range of rates including:
- 150 lbs./in.
- 165 lbs./in.
- 180 lbs./in.
- 200 lbs./in.
- 225 lbs./in.
- 250 lbs./in.
Technical Information
All front springs are closed and ground on one end to provide proper contact with the frame. The opposite end is either open to properly fit into the lower control arm of OEM A-Arms or closed for Aftermarket A-Arms.
Landrum Performance Front Drag Racing Coil Springs are light weight, high travel and made with the highest-grade High Tinsel Chrome Silicon Steel wire.
The drag race springs are cold wound, not hot wound. Each is properly heat treated and stress relieved to ensure the sides of the spring remain parallel during installation.
All Landrum Front Drag Racing Coil Springs use standardized testing procedures to ensure the best quality and performance.
Our springs are powder coated and not plated which avoids hydrogen embrittlement, a condition that can be caused by electroplating and can weaken metal.
Each spring is manufactured with the highest tolerance in mind and is designed with the correct pitch and height ratio to insure a consistent rate throughout the entire cycle.
More technical and application information can be found here.
_______________________
Spring Compressor for Long Length Coil Springs
This Spring Compressor makes it easy to install our 18” Front Drag Racing Coil Springs. Standard spring compressors just aren’t long enough to properly compress 18” springs, but our spring compressor is. The spring compressor is inserted through the top shock absorber opening and a long length threaded rod allows the compressor fingers to reach down to the bottom of the spring. A position adjustable bearing located toward the top of the rod seats on the top of the shock opening so the threaded rod turns freely when the spring compressor is tensioned or loosened.
Retail Price: $169.00
To purchase a spring compressor:
- Add a spring compressor to your Front Drag Racing Coil Springs order.
- Or to purchase a spring compressor separately click here.
Download Spring Compressor Instructions:
Download “Spring-Compressor-Instructions-2.0.pdf” Spring-Compressor-Instructions-2.0.pdf – Downloaded 11977 times – 199.22 KB_______________________
-
For over 25 years, Landrum’s Gold Series High Performance Coil Springs have been the trusted choice of racers seeking unmatched durability, consistency and performance. Whether you race on dirt or pavement, our racing coil springs deliver the precision and reliable consistency you need to dominate the track.
Why Choose Landrum Gold Series High Performance Coil Springs?
- Proven Track Record: Trusted by racers for over 25 years, Landrum’s Gold Series Springs are the preferred choice for Saturday night racers.
- State-of-the-Art Engineering: Our high performance coil springs are designed using cutting-edge spring design software to engineer the coil springs that racers are asking for.
- Premium Materials: We use high-tensile chrome silicon alloy steel, made in the USA, to manufacture track car suspension springs that provide maximum strength and perform as designed, even after repeated compression and extension.
- Rigorous Quality Control: Each Gold Series Spring is individually tested for precision and consistent performance, ensuring your springs meet exact specifications.
The Best Engineering and Materials for Racing Performance
We combine the latest spring design software with state-of-the-art engineering methods to produce the best high-performance coil springs on the market. Built for the most demanding races, Landrum springs ensure your suspension is up to the challenge.
- Superior Materials: Made from high-tensile chrome silicon alloy steel, our high performance coil springs provide unmatched strength, durability and lightness, so you can race with confidence.
- Precise Engineering: Designed with cutting-edge technology to ensure the highest performance for dirt and pavement racing.
- Testing for Perfection: We test each racing coil spring for tensile and compressive stiffness before manufacturing, ensuring every spring meets our rigorous quality standards.
Proven Performance – See the Landrum Difference
We test each Landrum Gold Series Spring to ensure it is within 2% of specification. We back it up by providing a dyno sheet showing how the spring performs as it is compressed. Providing you with confidence in every race. No other manufacturer of coil springs for racing does this.
Gold Series High Performance Springs – Available Sizes
Our Gold Series High Performance Coil Springs are available in a range of ODs, lengths, and rates to fit the needs of your racing setup. Whether you’re looking for front coil springs or rear coil springs, Landrum has the right solution for you.
Gold Series Front Coil Springs:
- 5” OD Front Springs (8” Length): Rates from 400 lb./in to 1000 lb./in
- 5” OD Front Springs (9.5” Length): Rates from 400 lb./in to 1600 lb./in
- 5” OD Front Springs (8.5” Length): Rates from 400 lb./in to 1500 lb./in
- 5” OD Front Springs (8” Length): Rates from 400 lb./in to 1500 lb./in
Gold Series Rear Coil Springs:
- 5” OD Rear Springs (8” Length): Rates from 125 lb./in to 450 lb./in
- 5” OD Rear Springs (10.5” Length): Rates from 100 lb./in to 475 lb./in
- 5” OD Rear Springs (13” Length): Rates from 100 lb./in to 475 lb./in
- 5” OD Rear Springs (14” Length): Rates from 100 lb./in to 400 lb./in
- 5” OD Rear Springs (15” Length): Rates from 75 lb./in to 275 lb./in
- 5” OD Rear Springs (16” Length): Rates from 75 lb./in to 375 lb./in
- 5” OD Rear Springs (18” Length): Rates from 75 lb./in to 125 lb./in
- 5” OD Rear Springs (20” Length): Rates from 50 lb./in to 100 lb./in
Landrum Service – Your Partner in Racing Excellence
At Landrum, we don’t just sell high performance coil springs; we work with racers and chassis builders to design and produce the perfect suspension solution for their needs. We take pride in providing personalized support and ensuring every customer gets the exact high-performance spring they need to win.
Ready to Upgrade Your Suspension?
Get Your Landrum High Performance Coil Springs Today! We’re ready to help you take your racing to the next level with springs that provide outstanding strength, precision, and reliable consistency.
Use our parts finder or contact us to find the perfect high-performance coil springs for your race car.
See more Landrum competition suspension springs technical information here.
Want to know how stacking springs affects spring rate? Check out the video: